Shure BETA 87A manual

Shure BETA 87A
7.5 · 1
PDF manual
 · 12 páginas
Español
manualShure BETA 87A

BETA 87A

SUPERCARDIOID CONDENSER MICROPHONE

The Shure Model BETA 87A is a premium quality supercar-
dioid hand-held electret condenser vocal microphone with ex-
ceptionally smooth frequency response and high sound pres-
sure level (SPL) capability. Used for professional sound
reinforcement, broadcasting, and studio recording applica-
tions, the BETA 87A combines superb performance with the
ruggedness needed for touring and field production.
The BETA 87A features a controlled low-frequency roll-off
that compensates for proximity effect and prevents the “boomy”
sound often associated with close pick-up. The characteristic
Shure presence rise brightens the upper midrange. The tight
supercardioid pattern, with null points at approximately 125°,
provides maximum isolation from other vocalists or instruments
while offering minimal off-axis coloration. The BETA 87A oper-
ates on phantom power.

Features:

Smooth frequency response with gradual presence rise
Highly consistent supercardioid polar pattern provides
superior gain-before-feedback
Electronic low-frequency roll-off compensates for proximity
effect
Wide dynamic range (117 dB) and low distortion character-
istics
Very low susceptibility to RFI and electromagnetic hum
Advanced cartridge shock-mount system absorbs mechan-
ical shocks and reduces handling noise
Built-in pop filter reduces undesirable wind and breath
sounds
Reliability for years of trouble-free performance

APPLICATION AND PLACEMENT

Some of the most common applications and placement
techniques are listed in the following table. Keep in mind that
microphone technique is largely a matter of personal taste—
there is no one “correct” microphone position.
SUGGESTED MICROPHONE
PLACEMENT
TONE QUALITY
Lips less than 6 inches (15 cm) away
or touching the windscreen, on axis to
microphone.
Robust sound, emphasized
bass, maximum isolation from
other sources.
6 inches to 2 feet (15 to 60 cm) away
from mouth, just above nose height.
Natural sound, reduced bass.
8 inches to 2 feet (20 to 60 cm) away
from mouth, slightly off to one side.
Natural sound, reduced bass
and minimal ”s” sounds.
3 to 6 feet (90 cm to 1.8 m) away. Thinner, distant sound; notice-
able levels of ambient noise.

General Rules for Microphone Use

1. Aim the microphone toward the desired sound source and at
a 125° angle away from unwanted sources. Don’t place un-
wanted sound sources directly to the rear of the microphone
since supercardioid microphones, such as the BETA 87A,
have a narrow pick up range at about 180°. Refer to Figure 1.
2. Place the microphone as close as practical to the desired
sound source. Refer to the table above.
3. Use only one microphone for each sound source.
4. Keep the distance between microphones at least three times
the distance from each source to its microphone.
5. Place microphones as far as possible from reflective sur-
faces.
6. Work close to the microphone for extra bass response.
7. Use the fewest number of microphones as is practical.
8. Add a windscreen when using the microphone outdoors.
9. Avoid excessive handling to minimize pick up of mechanical
noise and vibration.
10. Do not cover any part of the grille with your hand.
180
o
125
o
125
o
90
o
0
o
90
o
CORRECT
0
o
90
o
180
o
INCORRECTCORRECT
125
o
90
o
0
o
180
o
90
o
90
o

POSITIONING UNWANTED SOUND SOURCES

FIGURE 1

Model BETA 87A User Guide

27D2965 (Rev. 7)
2005, Shure Incorporated
Printed in U.S.A.

Manual

Ver el manual de Shure BETA 87A aquí, gratis. Este manual pertenece a la categoría Micrófonos y ha sido calificado por 1 personas con un promedio de 7.5 . Este manual está disponible en los siguientes idiomas: Español, Inglés . ¿Tienes alguna pregunta sobre Shure BETA 87A o necesitas ayuda? Haz tu pregunta aquí

¿Necesitas ayuda?

¿Tiene alguna consulta sobre el Shure BETA 87A y la respuesta no está en el manual? Haga su consulta aquí. Proporcione una descripción clara y completa de su problema y su consulta. Cuanto mejor describa su problema y consulta, más fácil será para otros propietarios de Shure BETA 87A proporcionarle una buena respuesta.

Número de preguntas: 0

Shure BETA 87A especificaciones

A continuación encontrará las especificaciones del producto y las especificaciones del manual del Shure BETA 87A.

General
Marca Shure
Modelo BETA 87A
Producto Micrófono
EAN 0042406148924, 0042406054744
Idioma Español, Inglés
Tipo de archivo Manual de usuario (PDF), Ficha de datos (PDF)
Micrófono
Tipo Micrófono de estudio
Frecuencia de micrófono 50 - 20000 Hz
Tipo de dirección de micrófono Supercardioide
Puertos e Interfaces
Tecnología de conectividad Alámbrico
Interfaz del dispositivo -
Control de energía
Voltaje de operación 52 V
Consumo de energía 1.2 mA
Desempeño
Color del producto Negro
mostrar más

Preguntas frecuentes

¿No puede encontrar la respuesta a su consulta en el manual? Puede encontrar la respuesta a su consulta en las preguntas frecuentes sobre el Shure BETA 87A más abajo.

¿No aparece tu pregunta? Haz tu pregunta aquí

No hay resultados