Samsung UN50EH5000 manual

Samsung UN50EH5000
  • Número de páginas: 2
  • Tipo de archivo: PDF


y For better picture and audio quality, connect to a digital device using an HDMI cable.
y The picture may not display normally (if at all) or the audio may not work if an external
device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
y Be sure to purchase a certifi ed HDMI cable. Otherwise, the picture may not display or a
connection error may occur.
y PC(D-Sub) and PC/DVI AUDIO IN input are not supported.
y For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
y Connecting through the HDMI cable may not be supported depending on the PC.
y If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work.
y EX-LINK: Connector for service only.

Remote Control

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifi cations may be changed without notice.Important Warranty Information Regarding Television Format Viewing See the warranty card for more information on warranty terms.Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fi ll the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on non- expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats you use for viewing. Uneven LED aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENTSubject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specifi ed, and to the Original Purchaser only.The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product. Excluded, but not limited to, are any originally specifi ed provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.For the location of a SAMSUNG Authorized Service Center, please call toll-free:–– In the United States : 1-800-SAMSUNG (1-800-726-7864)–– In Canada : 1-800-SAMSUNGStill image warningAvoid displaying still images (such as jpeg picture fi les) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:Avoid displaying the same TV channel for long periods.
Always try to display any image on full screen, use TV set picture format menu for
best possible match.Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.Securing the Installation SpaceKeep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.Failing to do so may result in fi re or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung
Electronics only.
x If you use parts provided by another manufacturer, it may result in a
problem with the product or an injury due to the product falling. The appearance may differ depending on the product.
Be careful when you contact the TV because some parts can be somewhat
Installation with a stand. Installation with a wall-mount.4inches4inches4inches4inches4inches4inches4inches

Channel Menu

Seeing Channels
Channel ListAdd, delete or set Favorite channels and use the program guide for digital broadcasts. Select a channel in the All Channels, Added
Channels, Favorite or Programmed screen by pressing the
/ buttons, and pressing the ENTER
button. Then you can watch the selected channel.Added Channels6 Air6-1 ♥ TV #6 7-1 ♥ TV #78 Air9 Air9-1 ♥ TV #910 Air10-1 ♥ TV #1011-1 ♥ TV #11
Air ' Zoom ' Select T Tools ► Next Program
All Channels: Shows all currently available channels. Added Channels: Shows all added channels. * Favorite: Shows all favorite channels. Programmed: Shows all currently reserved programs.
Using the remote control buttons with the Channel List
x Green (Zoom): Enlarges or shrinks a channel number.
x Yellow (Select): Selects multiple channel lists. Select desired
channels and press the Yellow button to set all the selected channels at the same time. The
mark appears to the left of the selected channels. x
(Tools): Displays the Channel List option menu. (The
Options menus may differ depending on the situation.)Channel Status Display iconsIcons Operations
A channel selected.
A channel set as a Favorite.
A reserved program.
A program currently being broadcast.
Memorizing channels
Antenna (Air / Cable)
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).Auto Program When selecting the Cable TV system: Selects the cable
system. STD, HRC and IRC identify various types of cable
TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected. After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears. Press the ENTER
button to stop the channel store during Auto Program.How to Stop Auto Programming1. Press the ENTER
2. A message will ask Stop Auto Program? Select Yes by
pressing the or button.3. Press the ENTER
Other Features
Clear Scrambled ChannelThis function fi lters out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes. Press the ENTER
button to stop the Clear Scrambled Channel.
This function is only available in Cable mode.
Channel ListChannel List Option Menu
Set each channel using the Channel List menu options. Option menu items may differ depending on the channel status. Add / Delete: Delete or add a channel to display the channels you want.
All deleted channels will be shown on the All Channels
menu. A gray-colored channel indicates the channel has been deleted.
The Add menu only appears for deleted channels.
Delete a channel from the Added Channels or Favorite
menu in the same manner. Add to Favorite / Delete from Favorite
: Set channels you watch frequently as Favorites. Timer Viewing: You can set a desired channel to be displayed automatically at the set time; even when you are watching another channel. Set the current time fi rst to use this function. Only memorized channels can be reserved.
Reserved programs will be displayed in the Programmed
When a digital channel is selected, press the (Next
Program) button to view the digital program. If you select the ENTER
(Schedule) button on the next program, you
can set Timer Viewing directly.
Channel Name Edit (analog channels only): Assign your own channel name. Select All: Select all the channels in the channel list. Deselect All: Deselect all the selected channels.
You can only select Deselect All when one or more
channels are selected. Auto Program: Scans for a channel automatically and stores in the TV Programmed (in Channel List)You can view, modify or delete a show you have reserved to watch. Change Info: Change a show you have reserved to watch. Cancel Schedules: Cancel a show you have reserved to watch. Information: Display a show you have reserved to watch. (You can also change the reservation Information.) Select All / Deselect All: You can select or deselect all channels in the channel list.

Sound Menu

Standard: Selects the normal sound mode. Music: Emphasizes music over voices. Movie: Provides the best sound for movies. Clear Voice: Emphasizes voices over other sounds. Amplify: Increase the intensity of high-frequency sounds to allow a better listening experience for the hearing impaired.Equalizer(standard sound mode only) Balance L/R: Adjusts the balance between the right and left speaker. 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): Adjusts the level of specifi c bandwidth frequencies. Reset: Resets the equalizer to its default settings.SRS TruSurround HD(standard sound mode only)SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.Preferred Language (digital channels only)Digital-TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). You can only select a language from among the ones being broadcasted.Multi-Track Sound (MTS)(analog channels only) Mono: Choose for channels that are broadcasting in mono or if you are having diffi culty receiving a stereo signal. Stereo: Choose for channels that are broadcasting in stereo. SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation. Depending on the program being broadcast, you can listen to Mono, Stereo or SAP. Auto VolumeBecause each broadcasting station has its own signal conditions, the volume may fl uctuate each time channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.SPDIF OutputThe SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital audio signal when you connect the digital audio jack on the back of the TV to a digital audio in jack on a receiver or home theater. Audio Format: You can select the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF) format may differ depending on the input source.
By connecting the TV to a receiver or home theater with Dolby
Digital and 5.1ch speakers and selecting Dolby Digital, you
can maximize your interactive 3D sound experience. Audio Delay: Lets you correct timing mismatches between the audio track and the video when you are watching the TV and listening to digital audio output from the TV through an external device such as an AV receiver. When you select Audio Delay, a slider appears. Use the left and right arrow buttons to adjust the slider. Press ENTER
when done (0ms ~ 250ms).Speaker Select Speaker Select (External Speaker / TV Speaker): If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the speakers attached to your audio receiver. If this occurs, set the TV to External Speaker.
When you set Speaker Select to External Speaker, the
TV’s speakers are turned off. You will hear sound through the
external speakers only. When you set Speaker Select to TV
Speaker both the TV’s speakers and the external speakers are on. You will hear sound through both.
When Speaker Select is set to External Speaker, the
VOLUME and MUTE buttons will not operate and the sound
settings will be limited.
If there is no video signal, both the TV’s speakers and the
external speakers will be mute.Sound Reset Reset All: Resets all sound settings to the factory defaults.

Setup Menu

Setting the Time
The current time will appear every time you press the INFO button. Clock: Setting the clock is for using various timer features of the T V. If you disconnect the power cord, you have to set the clock again.Clock Mode: Set the current time manually or automatically.
Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
Available only when Clock Mode is set to Manual.
Time Zone: Select your time zone.DST (Daylight Saving Time): Switches the DST (Daylight Saving Time) function on or off.
DST and Time Zone function is only available when the
Clock Mode is set to Auto. Sleep Timer
Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
To cancel the Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3Three different on / off timer settings can be made. You must set the clock fi rst. On Time / Off Time: Set the hour, minute, am/pm and Activate / Inactivate. (To activate the timer with the setting you have chosen, set to Activate.) Volume: Set the desired volume level.


user manual

Getting Started

Accessories Remote Control (AA59-00600A) & Batteries (AAA x 2) Warranty Card / Safety Guide Owner’s Instructions Power CordInput Cables (Sold Separately) RS232 (AA39-00311A) Audio HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) Check the cable before plug-inCable Ports
OpticalDo not plug cable upside down.Be sure to check before plug-in.TV Controller (Panel Key)Power on Turns the TV on by pressing the controller in standby mode.Adjusting the volumeAdjusts the volume by moving the controller from side to side when the power is on.Selecting a channelSelects a channel by moving the controller up and down when the power is on.Using the function menuPress the controller when the power is on, then the function menu screen appears. If you press it again, the function menu screen disappears.Selecting the Media PlaySelects the MEDIA.P by moving the controller in the function menu screen. The Media Play main screen appears.Selecting the MENU (m)
Selects the MENU(m) by moving the controller in the
function menu screen. The OSD(On Screen Display) of your TV’s feature appears.Selecting the Source List (s)Selects the Source List(s) by moving the controller in the function menu screen. The Source List screen appears.Power Off (
Selects the Power Off (
) to turn the TV off by moving the controller in the function menu screen.
Exits the menu when pressing the controller more than 1 second.
When selecting the function by moving the controller to the up/down/left/
right directions, be sure not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right directions.Plug & Play (Initial Setup)When you turn the TV on for the fi rst time, a sequence of on-screen
prompts will assist in confi guring basic settings. Press the POWER
button. Plug & Play is available only when the Input source is set to T V. Connecting the power cord and antenna. (refer to ‘Connections’) Selecting a languageSelect Language of the OSD.Language U Move
EnterPlug & Play
EnglishEspañolFrançaisSelect the desired OSD (On Screen Display) language.
Selecting a Home Use modeSelect ‘Home Use’ when installing this TV in your home. L Move
EnterPlug & PlayHome UseStore Demo
Select the Home Use mode. Store Demo mode is for retail environments.When pressing TV controller, the function menu screen appears. Select
the MENU(m) and press it more than 5
seconds using the controller. The Store Demo mode is set. Cancel the Store
Demo by selecting Source List(s)
and pressing it more than 5 seconds.
Selecting an antennaSelect the Antenna source to memorize.Air StartCableStartAuto Start U Move
Enter m Skip Plug & Play
In Cable mode, you can select the correct
signal source among STD, HRC, and IRC
by pressing the , , or button.
Setting the Clock ModeSet the Clock Mode.Clock Mode : AutoPlug & Play E Enter
Set the Clock Mode automatically or manually.If you select the Auto, set the DST(Daylight Saving Time).On the DST screen, press ENTER
then select whether to turn DST (Daylight Savings Time) on or off. Select the time zone where you live.
Viewing the HD Connection GuideThe connection method for the best HD screen quality is displayed.
Enjoy your TV.Press the ENTER

Changing the Input Source

Source ListUse to select TV or an external input source such as a DVD player / Blu-ray player / cable box / STB satellite receiver.1. Press the SOURCE button.2. Select a desired external input source. TV / AV / Component / HDMI1/DVI / HDMI2 You can only choose external devices that are connected to the TV. In the Source List, connected inputs will be highlighted.How to use Edit NameEdit Name lets you associate a device name to an input source. To
access Edit Name, press the TOOLS button in Source List. The
following selections appear under Edit Name: VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.
When connecting a PC to the HDMI IN 1(DVI) port with HDMI
cable, you should set the TV to PC mode under Edit Name.
When connecting a PC to the HDMI IN 1(DVI) port with HDMI
to DVI cable, you should set the TV to DVI PC mode under Edit
When connecting an AV devices to the HDMI IN 1(DVI) port
with HDMI to DVI cable, you should set the TV to DVI mode under Edit Name.InformationYou can see detailed information about the connected external device.HDMI OUTHDMI OUTAUDIO OUTR-AUDIO-LVIDEO OUT OPTICALANT OUTW R BR
Power InputTV Rear PanelTV Side PanelVHF/UHF AntennaAudio Device (1)Using an Audio (Analog) CableAudio Device (2)Using an Optical (Digital) CableAV Device (2)Using an Audio/Video AV Device (3)Using a Component Cable (up to 1080p)Media PlayUsing a USB Drive
Using a HDMI (to DVI) Cable
Blu-ray player / DVD / cable box / sat boxAV Device (1)Using a HDMI Cable (up to 1080p)Digital Audio System Contents: When the On Time is activated, you can turn on a specifi c channel or play back contents such as photo or audio les.
- TV/USB: Select TV or USB. (Make sure that an USB device is
connected to your TV.)- Antenna: Displays the current antenna source.- Channel: Select the desired channel.
- Music/Photo: Select the folder containing MP3/JPEG  les on
the USB device. The maximum displayed number of files, including sub folders, in one folder of USB storage device is 2000. The media may not be playing smoothly when using the device lower than USB 2.0.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer.
Other Features
Program Rating LockThe Program Rating Lock feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal identi cation number) before any of the Program Rating Lock restrictions are set up or changed.
Program Rating Lock is not available in HDMI or
Component mode. The default PIN number of a new TV set is “0-0-0-0”. Program Rating Lock: You can block rated TV Programs. TV Parental Guidelines: You can block TV programs depending on their rating. This function allows you to control what your children are watching. MPAA Rating: You can block movies depending on their MPAA rating. The Motion Picture Association of America(MPAA) has implemented a rating system that provides parents or guardians with advanced information on which fi lms are appropriate for children. Canadian English: You can block TV programs depending on their Anglophone Canadian. Canadian French: You can block TV programs depending on their French Canadian rating. Downloadable U.S. Rating: Parental restriction information can be used while watching DTV channels. Change PIN: The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Re-enter
the same 4 digits in Confi rm New PIN. When the Change
PIN screen disappears, press the OK button. The TV has memorized your new PIN. If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to “0-0-0-0” :
POWER (off) MUTE 8 2 4 POWER (on)
LanguageSet the menu language.
Choose between English, Español and Français.
Game ModeWhen connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu. Precautions and limitations for game mode
x To disconnect the game console and connect another external
device, set Game Mode to Off in the setup menu.
x If you display the TV menu in Game Mode, the screen shakes
Game Mode is not available when the input source is set
to TV.
After connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.Caption(On-Screen Text Messages) Caption: You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.
The Caption feature does not work in Component or
HDMI mode. Caption Mode: You can select the desired caption mode.Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels only) The Digital Captions function works with digital channels.
Service1~6 may not be available in digital caption mode
depending on the broadcast. Digital Caption Options: (digital channels only)Size: Options include Default, Small, Standard and Large. The default is Standard.Font Style: Options include Default and Styles 0 to 7. The default is Style 0.Foreground Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letter. The default is White.Background Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the caption. The default is Black.Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent, Solid and Flashing.Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to its default.
Digital Caption Options are available only when Default
and Service1 ~ Service6 can be selected in Caption
Mode. The Foreground and Background cannot be set to have the same color.MelodySet so that a melody plays when the TV is turned on or off.
The Melody does not play.
x When no sound is output from the TV because the MUTE
button has been pressed.
x When no sound is output from the TV because the volume has
been reduced to minimum with the VOL – button.
x When the TV is turned off by Sleep Timer function.
Auto Protection Time Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the screen remains idle with a still image for a certain period of time defi ned by the user, the screen saver is activated to prevent the formation of ghost images on the screen.© 2012 Samsung Electronics Co., Ltd. All rights reserved.Press to select additional channels (digital) being broadcasted by the same station. For example, to select channel ‘54-3’, press ‘54’, then press ‘-’ and ‘3’.Returns to the previous channel. Press to directly access to channels.Turns the TV on and off.Displays and selects the available video sources. Use these buttons in a specifi c feature.P.SIZE: Lets you choose the picture size.
MTS: Press to choose stereo, mono or Separate Audio
Program (SAP broadcast). CC: Controls the caption decoder. Cuts off the sound temporarily.Automatically shuts off the TV at a preset time.Displays the channel list on the screen. Displays information on the TV screen. Quickly select frequently used functions. Selects the on-screen menu items and changes the values seen on the menu.Exit the menu.Returns to the previous menu.Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to On will reduce the battery usage time.)Use these buttons according to the direction on screen.Changes channels.Displays the main on-screen menu.Views the Media Play.Adjusts the volume.MEDIA.P SLEEP y The side panel may differ depending on the model. Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please
contact the SAMSUNG customer care center. Country CANADA U.S.A AddressSamsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 CanadaSamsung Electronics America, Inc. 85 Challenger Road Ridge eld Park, NJ 07660 Customer Care Center
1-800-SAMSUNG (726-7864) Web (English) (French) 2 -- 1 -- 6 -- 5 -- 3 -- 7 -- 4 -- 8 -
BN68-04499B-01Display Modes (HDMI/DVI Input)Optimal resolution4000 series:1366 x 768@60Hz / 5000 series: 1920 x 1080@60Hz Mode ResolutionHorizontal Frequency (KHz)Vertical Frequency (Hz)Pixel Clock Frequency (MHz)Sync Polarity (H / V)1366 x 768 1920 x 1080
640 x 350 31.469 70.086 25.175 +/-
c c
720 x 400 31.469 70.087 28.322 -/+
c c
640 x 480 35.000 66.667 30.240 -/-
c c
832 x 624 49.726 74.551 57.284 -/-
c c
1152 x 870 68.681 75.062 100.000 -/-
640 x 480 31.469 59.940 25.175 -/-
c c
640 x 480 37.861 72.809 31.500 -/-
c c
640 x 480 37.500 75.000 31.500 -/-
c c
800 x 600 37.879 60.317 40.000 +/+
c c
800 x 600 48.077 72.188 50.000 +/+
c c
800 x 600 46.875 75.000 49.500 +/+
c c
1024 x 768 48.363 60.004 65.000 -/-
c c
1024 x 768 56.476 70.069 75.000 -/-
c c
1024 x 768 60.023 75.029 78.750 +/+
c c
1152 x 864 67.500 75.000 108.000 +/+
1280 x 720 45.000 60.000 74.250 +/+
c c
1280 x 800 49.702 59.810 83.500 -/+
1280 x 1024 63.981 60.020 108.000 +/+
1280 x 1024 79.976 75.025 135.000 +/+
1366 x 768 47.712 59.790 85.500 +/+
c c
1440 x 900 55.935 59.887 106.500 -/+
1600 x 900RB 60.000 60.000 108.000 +/+
1680 x 1050 65.290 59.954 146.250 -/+
1920 x 1080 67.500 60.000 148.500 +/+
Installing batteries (Battery size: AAA) NOTE x Use the remote control within 23 feet from TV. x Bright light may affect the performance of the remote control. Avoid use when nearby fluorescent lights or neon signs.
x The Color and shape may vary depending on the model.
Channel ModeChange the channel mode directly between Added Channels and Favorite Channels.
The Favorite Channels is enabled only when you set Add to
Favorite.Fine Tune (analog channels only)If the reception is clear, you do not have to fi ne tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fi ne tune the channel manually. Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.
To reset the fine-tuning, select Reset.

Picture Menu

Select your preferred picture type.
When connecting a PC, you can only select Entertain and
Standard. Dynamic: Suitable for a bright room. Standard: Suitable for a normal environment. Movie: Suitable for watching movies in a dark room. Entertain: Suitable for watching movies and games. Only available when connecting a PC.Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R) Your television has several setting options for picture quality control. When connecting a PC, you can only make changes to Backlight, Contrast, Brightness and SharpnessAdvanced Settings(available in Standard / Movie mode)Compared to previous models, new Samsung TVs have a more precise picture.
When connecting a PC, you can only make changes to Gamma
and White Balance. Color Space (Auto / Native): Adjusts the range of colors available to create the image. White Balance: Adjusts the color temperature for a more natural picture.R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green, blue) darkness.R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue) brightness.Reset: Resets the White Balance to it’s default settings. Gamma: Adjusts the primary color intensity. Dynamic Contrast (Off / Low / Medium / High): Adjusts the screen contrast. Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth. Flesh Tone: Emphasize pink “ esh tone”. Motion Lighting (Off / On): Reduce power consumption by brightness control adapted motion.
Available in Standard mode only.
Picture Options When connecting a PC, you can only make changes to the
Color Tone, Size and HDMI Black Level.
Color Tone (Cool / Standard / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the picture mode
is Dynamic. Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.16:9: Sets the picture to 16:9 wide mode.Zoom1: Use for moderate magnifi cation.Zoom2: Use for a stronger magnifi cation.
Wide Fit: Enlarges the aspect ratio of the picture to fi t the entire
screen.4:3: Sets the picture to basic (4:3) mode. Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty.Screen Fit (DTV): Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted. HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720) Settings can be adjusted and stored for each external device you have connected to an input on the TV. Picture Sizes available by Input Source:Input Source Picture Size
ATV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3
DTV(1080i, 1080p), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p)
16:9, Wide Fit, 4:3, Screen Fit
Digital Noise Filter (Off / Low / Medium / High / Auto): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. When the signal is weak, try other options until the best picture is displayed. HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth.
Available only in HDMI mode (RGB signals).
Film Mode (Off / Auto): Sets the TV to automatically sense and process fi lm signals from all sources and adjusts the picture for optimum quality.
Available in ATV, DTV(interlace), AV, COMPONENT (480i /
1080i) and HDMI (480i / 1080i). LED Motion Plus (Off / On): Removes drag from fast scenes with a lot of movement to provide a clear picture.Picture ResetResets your current picture mode to its default settings. Reset Picture Mode: Returns all picture values in the currently selected mode to the default settings.TV ControllerFunction menuRemote control sensorMEDIA.Pm R
Return[UE4000-5000-ZC]BN68-04499B-01-ENG.indd 1 2013-07-30  11:44:24
Samsung UN50EH5000

¿Necesitas ayuda?

Número de preguntas: 0

¿Tienes alguna pregunta sobre Samsung UN50EH5000 o necesitas ayuda? Haz tu pregunta aquí. Proporciona una descripción clara y completa de tu consulta. Cuantos más detallada sea tu consulta, más fácil será para otros Samsung UN50EH5000 propietarios responder adecuadamente a tu pregunta.

Ver el manual de Samsung UN50EH5000 aquí, gratis. Este manual pertenece a la categoría Televisores LED y ha sido calificado por 1 personas con un promedio de 8.4 . Este manual está disponible en los siguientes idiomas: Inglés . ¿Tienes alguna pregunta sobre Samsung UN50EH5000 o necesitas ayuda? Haz tu pregunta aquí

Samsung UN50EH5000 especificaciones

La tecnología de pantalla táctil intuitiva le permite controlar su PC directamente desde la pantalla. La brillante resol...
Prepárese para disfrutar de imágenes brillantes y nítidas con la inolvidable calidad de esta impresionante pantalla FHD.
No es necesario comprar altavoces externos para obtener un audio excelente. Gracias a sus altavoces integrados, esta pan...
Los puertos HDMI dobles le ofrecen más posibilidades de conexión para disfrutar de imágenes HD en su pantalla grande. * ...
La pantalla está equipada con montaje VESA estándar para instalarla en una pared o en un brazo giratorio.
Comodidad en la palma de su mano con un mando a distancia que hace el control de su pantalla más fácil que nunca.
Marca Samsung
Modelo UN50EH5000
Producto Televisor LED
EAN 36725237919
Idioma Inglés
Tipo de archivo PDF
Diagonal de la pantalla 50 "
Tipo HD Full HD
Resolución de la pantalla 1920 x 1080 Pixeles
Formato de vídeo soportado 1080p
Brillo de pantalla - cd / m²
Tiempo de respuesta - ms
Tipo de retroiluminación LED -
Tecnología de interpolación de movimiento CMR (Clear Motion Rate) 120
Relación de aspecto nativa 16:9
Otras características
3D No
Altavoces incorporados Si
Función de reloj Si
Sintonizador de la TV
Tipo de sintonizador Analógico y digital
Señal analógica -
Formato de señal digital DVB-C
Autobusqueda de canal Si
Smart TV
Smart TV No
TV por Internet No
Número de altavoces 2
Potencia estimada RMS 20 W
Nivelador automático de volumen Si
Puertos e Interfaces
Número de puertos HDMI 2
PC (D-Sub) -
Puerto DVI No
Cantidad de puertos DVI-D 0
Cantidad de puertos USB 2.0 1
Cantidad de puertos tipo A USB 3.2 Gen 1 (3.1 Gen 1) 0
Video componente (YPbPr/YCbCr) entrada 1
Entrada de video compuesto 1
Audio digital, salida optica 1
Número de puertos RF 1
Ethernet LAN (RJ-45) cantidad de puertos 0
Interfaz común -
Interfaz común Plus (CI+) -
Entrada de S-Video 0
Salidas para auriculares 1
Ethernet No
Wifi No
Características de administración
Guía electrónica de programación -
Exhibición en pantalla (OSD) Si
Número de lenguajes OSD 3
Temporizador Encendido/Apagado Si
Apagado automático Si
Oscurecimiento local -
Funciones de teletexto -
Tecnología de procesamiento de imagen Samsung Wide Color Enhancer
Modo de juego Si
Color del producto Negro
Interfaz de panel de montaje 400 x 400 mm
montaje VESA Si
Interruptor de encendido/apagado integrado -
Control de energía
Consumo de energía (max) 121 W
Consumo de energía (inactivo) 0.3 W
Consumo energético 47 W
Voltaje de entrada AC 110 - 120 V
Frecuencia de entrada AC 60 Hz
Peso y dimensiones
Ancho (sin base) 1137.92 mm
Profundidad (sin base) 93.98 mm
Altura (sin base) 670.56 mm
Peso (sin base) 15694.3 g
Ancho del dispositivo (con soporte) 1137.92 mm
Profundidad dispositivo (con soporte) 228.6 mm
Altura del dispositivo (con soporte) 723.9 mm
Peso (con soporte) 18279.77 g
Ancho del paquete 1330.96 mm
Profundidad del paquete 172.72 mm
Altura del paquete 762 mm
Peso del paquete 21681.72 g
Mando a distancia incluido Si
Soporte de sobremesa Si
Manual de usuario Si
Detalles técnicos
Certificados de sostenibilidad ENERGY STAR
mostrar más

Preguntas frecuentes

A continuación, encontrarás las preguntas más frecuentes sobre Samsung UN50EH5000.

¿No aparece tu pregunta? Haz tu pregunta aquí